PowerDock™
Carpets Simply Flawless
Advanced Mopping System
The DuoScrub™ mopping system uses two high-speed rotary mops that scrub with added pressure, combining precise 32-level mop moisture adjustment* for a fast-drying, pet-friendly finish.
System
Control
80°C Hot Water Mop Self-Cleaning
Thorough
Self-Cleaning Begins with Heat
Battery
Charging
Charging
- Product NameL50 Ultra CE
- Robot Vacuum Dimensions350mm x 350mm x 97mm
- Base Station Dimensions457mm x 340mm x 590mm
- Robot Vacuum Weight3.89kg
- Base Station Weight8.90kg
- Maximum Suction25,000Pa
- Extendable Side Brush✓
- MopExtend™ RoboSwing✓
Frequently Asked Questions
Is the Dreame L50 Ultra CE suitable for homes with pets?
Yes. The Dreame L50 Ultra CE is designed to handle common pet messes like pet hair and cat litter, making it a good fit for many homes with pets. You can also use the app to create pet zones and adjust dust-collection mode for those areas when needed.
It uses 25,000Pa Vormax™ suction, and its 99% hair-removal result was measured in controlled conditions. Actual results can vary depending on your floors, your pet’s hair type, and how much debris builds up between cleans.
How does the Dreame L50 Ultra CE clean carpets without wetting them?
The L50 Ultra CE is designed to help clean carpets while keeping the mop raised. You can adjust how the robot handles carpeted areas instead of using one setting for every floor type.
It has a 10.5 mm mop-lift height and four carpet-tailored modes. If you have a rug you do not want mopped, check the carpet settings in the Dreamehome app before cleaning, and review the L50 Ultra CE manual for more information.
Can the Dreame L50 Ultra CE clean edges and corners effectively?
Yes. The L50 Ultra CE is built to clean closer to walls, corners, furniture legs, and other hard-to-reach areas using Dual Flex Arm Technology, which moves the extendable side brush and mop toward perimeter areas.
SideReach Vacuuming helps it reach into tight corners and beneath curved furniture, while MopExtend RoboSwing helps mop along edges and around chair legs. The mop pad can extend up to 4 cm. Edge and corner coverage can vary with your room layout, furniture shape, and obstacle placement.
How does the L50 Ultra CE hot-water mop washing system work?
The hot-water mop washing system helps keep the mop pads cleaner between runs. When the L50 Ultra CE returns to the PowerDock, the dock washes the rotating mop pads with heated water to help remove dirt before the next clean.
The water can reach up to 80°C at the water outlet under test conditions, and actual water temperature can vary. You can choose Light, Standard, or Deep washing, plus Normal, 45°C, 60°C, or 80°C temperature settings. During washing, 20 spray nozzles clean the washboard while the pads rotate, dirty water drains away, and hot air dries the pads afterward.
What routine dock and brush maintenance does the Dreame L50 Ultra CE require?
A little routine care helps prevent odors, clogs, and reduced cleaning performance. After each use, empty and rinse the used-water tank, and clean the clean-water tank about every two weeks.
About once a month, wipe the dock’s signaling area, charging contacts, and auto-empty vents with a soft, dry cloth. Rinse the washboard filter every one to two months. Remove hair from the main brush with a proper cleaning tool, and remove hair from the side brush after unscrewing it. Replace the dust bag about every two to four months, depending on how often you clean.
Declaimers
*25,000Pa: Based on our in-house lab data. Actual performance may vary.*80°C hot water: The base station water outlet temperature can reach up to 80°C after heating, under standard room conditions of about 23°C. Actual temperature may vary.
*25,000Pa, 100% particle pickup, 99% hair removal: Based on our in-house lab data. Actual performance may vary.
*100% corner coverage, 0mm along the corner, 99% edge coverage, 4cm: Based on our in-house lab data. Actual performance may vary.
*32-level mop moisture adjustment: slightly dry (5)/moist (16)/wet (27).
*99% mop stain removal: Based on our in-house lab data. Actual performance may vary.
*80°C hot water: The base station water outlet temperature can reach up to 80°C after heating, under standard room conditions of about 23°C. Actual temperature may vary.
*3 washing modes: Light/Standard/Deep.
*4 temperature settings: Normal/Mid (45°C)/Warm (60°C)/Hot (80°C).
*100 days: Based on our in-house lab data. Actual performance may vary.
*100% dry mops: Based on our in-house lab data. Actual performance may vary.
*Detergent: To avoid potential damage, use our official cleaning solutions.
*Water hookup kit: Purchased separately. Support in some regions.
*231 minutes, 156㎡: Based on our in-house lab data in Vacuum Only mode under Quiet Suction. Actual performance may vary.
*30% faster: Based on our in-house lab data, compared to Dreame's robot vacuum models without fast charging.
*Off-peak hours: May vary by region. Please set and adjust according to local conditions.
*10.5mm: Based on our in-house lab data. The height difference of the robot vacuum is 10.5mm before and after mop lifting.
*Pet zones: Set the dust-collection mode if necessary.
*Adjustable water volume: slightly dry (5)/moist (16)/wet (27).
*Custom preferences: 5-level suction adjustment*、32-level mop moisture adjustment*、4 cleaning routes*.
*5-level suction adjustment: Quiet/Standard/Turbo/Max/Max+ (only available in Mop after Vac Mode).
*32-level mop moisture adjustment: slightly dry (5)/moist (16)/wet (27).
*4 cleaning routes: quick/standard/intensive/deep (only available in Mop and Mop after Vac Modes).
*Matter protocol: Available through an upcoming OTA update. Please stay tuned.
*Alexa, Siri, and Google Home: The third-party service requires a device that integrates voice technology.
KSA
Türkiye
Australia
中国大陆
日本
Ireland
Portugal
Italia
Netherlands
Belgium
Greece
Polska
Norway
Sweden
Finland
Denmark
Hungary
Czechia
Slovenia
Croatia
Switzerland
United
Kingdom
Canada

























